LED lamp bead type commonly used in solar lamps

December 23, 2020

Hello everyone, today I will share with you a few knowledge points about the LED lamp beads of Solar Street Light. At present, on the market, you will see many manufacturers' standard lamp bead models such as 5730, 3030, 2835, 5050, COB and so on. Let me first introduce what these numbers mean. Take the 5730 patch as an example: this patch lamp bead is usually named after the product specification, that is, 5.7mm*3.0mm. ä¸»å¾1.jpg

The voltage of red and yellow light is generally around 1.9-2.4V. The voltage of blue, white and green light is generally between 2.9-3.6V. If the power is 0.2W, the rated current is 60mA. If the power is 0.5W, the rated current is 150mA

In fact, here is a parameter value of current and voltage. We all know that in the case of series connection, the voltage does not change and the current is added. Therefore, the entire lamp bead needs to be lit, and the required starting voltage must be at least 3.2V, not higher than This voltage may cause a short circuit or damage the lamp beads. We assume that this 5730 lamp bead is 0.5W, then the starting current required for this light source board is: 48*150mA=7200mA, of course, 7200mA represents the best state, if it is lower than this current, the light source can also Bright, just not in the best condition
ä¸»å¾2.jpg

We then use voltage*current=7.2A*3.2V=23.04Wh, so we can conclude that the entire light source board is discharged with a power of 23W, which can theoretically last about an hour.

Look at another lamp bead 3030 that is also more commonly used on the market now. In the same way, this SMD lamp bead is named after the product's specifications, that is, 3.0mm*3.0mm.
ä¸»å¾3.jpg

The voltage of 3030 SMD lamp beads: the voltage of white light is generally between 2.9-3.6V, and there are also 6V voltages. 3030 lamp beads are generally packaged into 1W. If the voltage is 3.2V, the rated current is about 300-330mA. If the power is 6V, the rated current is about 120-150mA. ä¸»å¾3+.jpg

The aluminum substrate of 3030 lamp beads, the serial and parallel parameters are 6B5C, that is, 6 parallels and 5 strings. Assuming a 6V lamp bead is attached, the overall current and voltage of this light source is: 6*150mA=900mA, 5*6V=30V; if a 3.2V lamp bead is attached, then: 6*300mA=1800mA, 5*3.2V=16V. From this parameter, we deduced that this light source board is driven by the mains, not a Solar light source board.

The above is the LED lamp bead type commonly used in solar lamps we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Solar lawn lights, environmental protection! !

Next:Rural solar street lights add color to your life